Related products

• 

  Read more

  Avant Flail Mower

  [woosw id="28500"]

  Flail mower is a drum-type cutter, intended for cutting of long grass, lade configuration scrub, bush and similar vegetation. It will cut up to 0.8 in thick tree branches with ease. The blades on the flail mower shaft move freely, so in case they hit a solid obstacle they will give in rather than break. This saves the blades costs when cutting in an unfamiliar place. Flail mower is the optimal cutting device for places where you need a lot of cutting power and a rougher cut will do. The most common grounds for flail mowers are places with taller vegetation like meadows, road banks, yard areas etc.

  Read more
• 

  Read more

  Avant Cutting Bar

  [woosw id="28498"]

  The S30 cutting bar mounts on the side arms with the S30 quick-attach system (both on the mechanical & hydraulic side arm). It cannot be mounted on the attachment coupling plate of the loader. S30 cutting bar is equipped with the same cutting blades and blade guides as the A35676 Cutting bar. The frame and actuator mechanism are however stronger, which means the S30 cutting bar is optimized for hedge cutting and doesn’t work too well with hay because of the higher frame. There are wear plates at each end of the cutting bar, useful when working on paved and asphalt surfaces for instance.

  Read more
• 

  Read more

  Avant 700 Series

  [woosw id="28472"]

  Avant 700 series offers strong and real multi-use loaders for jobs where high lift capacity and/or drive speed is needed, yet at the same time the machine shall be as compact as possible. The 700 series is the perfect tool for street cleaning and other property maintenance tasks on narrow streets and yards in the cities, lifting and handling bales, etc. on farms, handling paving stones, moving materials on construction sites, and in many other applications. Easy transportation with a car trailer and a high drive speed enable quick transfers between work sites.

  Read more
• 

  Read more

  Avant E-Series

  [woosw id="28467"]

  Avant was the first manufacturer to introduce a full-electric, battery-powered compact loader series to the market. Full electric loader with zero-emission and extremely low noise is the answer to future demands. Although the e series is electric it offers the same power and properties as the Avant 500 series which is equipped with a diesel engine. The Avant e5 has an integrated battery charger as standard, which makes it possible to charge batteries anywhere a 3-phase, 480 volt power outlet is available. Avant e5 is equipped with a maintenance-free Absorbent Glass Mat (AGM) battery. You can charge the e5 fully in 5 hours and work with it between one and two hours. This makes the e5 a very good option if your work allows you to charge for a longer period.

  Read more