| Operating Capacity: | 4,190 lbs. |
|---|---|
| Operating Weight: | 5,600 lbs. |
| Rated Horsepower: | 57 |
| Bucket Breakout Force: | 4,850 lbs. |
The flagship of the range, Avant 800 series pushes the limits of a compact loader. It has more lift height and capacity than ever before. It reaches all the way to tall mixer feeder wagons and can load a truck from one side to the far edge no need to drive around the truck when loading. 800 series can also handle stone pallets with ease thanks to the 4190 lb capacity. Yet it is compact enough to work in places where bigger machines cannot go and can be transported on a conventional car trailer.
Avant general buckets are designed with the operator in mind. Without leaving the seat, the operator can see the front edge of the bucket. The sides of the general buckets flare out for complete emptying of all kinds of material. Also, there are no reinforcement plates inside the bucket to that would interfere with loading or emptying. To further enhance the operator’s visibility, there are narrow slots at the upper end of the bucket to allow the operator to see into the bucket and prevent spillage back towards the loader. Available with straight edge and with teeth.
Flail mower is a drum-type cutter, intended for cutting of long grass, lade configuration scrub, bush and similar vegetation. It will cut up to 0.8 in thick tree branches with ease. The blades on the flail mower shaft move freely, so in case they hit a solid obstacle they will give in rather than break. This saves the blades costs when cutting in an unfamiliar place. Flail mower is the optimal cutting device for places where you need a lot of cutting power and a rougher cut will do. The most common grounds for flail mowers are places with taller vegetation like meadows, road banks, yard areas etc.
Powerful pressure washer with 65 foot hose reel; easy to take anywhere with the Avant. Creates maximum 8 gal/min water flow and 2900 PSI pressure. Can be connected directly to a water hose or a barrel. Can suck water via inlet hose from as much as 10 feet below the level where the unit is. This is a very useful feature when taking water from a tank, reservoir, lake etc.
The 500 series is in the middle of Avant loader range in terms of size and performance. The 500 series loaders are well suited for a wide range of customer segments thanks to their power and straight forward hydraulics which is needed in many jobs. The compact dimensions and good maneuverability allow working in a large variety of environments. 500 series can also lift amazingly heavy loads compared to the size of the machine.
