| Operating Capacity: | 772 lbs. |
|---|---|
| Operating Weight: | 1,540 lbs. |
| Rated Horsepower: | 20 – 25 |
Avant 200 series is an amazingly powerful and versatile compact loader considering its small size. The basic ideology with the articulated design and hydraulic 4×4 transmission is the same as in bigger Avant’s. Easy access to driver’s seat, ample space for operator, logical and easy-to-use controls and excellent visibility to the working area guarantee efficient operation. The Avant quick attach system for attachments and hydraulic multi-connector are standard features as well. The 200 series is especially strong in driving attachments with its max 11.1 gal/min hydraulics flow. The wide Avant attachment range allows working all year round be it earthmoving, lawn mowing, digging, load handling, snow removal, etc. 200 series is much more than a ride-on lawn mower, compact tractor or a quad bike.
Flail mower is a drum-type cutter, intended for cutting of long grass, lade configuration scrub, bush and similar vegetation. It will cut up to 0.8 in thick tree branches with ease. The blades on the flail mower shaft move freely, so in case they hit a solid obstacle they will give in rather than break. This saves the blades costs when cutting in an unfamiliar place. Flail mower is the optimal cutting device for places where you need a lot of cutting power and a rougher cut will do. The most common grounds for flail mowers are places with taller vegetation like meadows, road banks, yard areas etc.
The S30 cutting bar mounts on the side arms with the S30 quick-attach system (both on the mechanical & hydraulic side arm). It cannot be mounted on the attachment coupling plate of the loader. S30 cutting bar is equipped with the same cutting blades and blade guides as the A35676 Cutting bar. The frame and actuator mechanism are however stronger, which means the S30 cutting bar is optimized for hedge cutting and doesn’t work too well with hay because of the higher frame. There are wear plates at each end of the cutting bar, useful when working on paved and asphalt surfaces for instance.
The flagship of the range, Avant 800 series pushes the limits of a compact loader. It has more lift height and capacity than ever before. It reaches all the way to tall mixer feeder wagons and can load a truck from one side to the far edge no need to drive around the truck when loading. 800 series can also handle stone pallets with ease thanks to the 4190 lb capacity. Yet it is compact enough to work in places where bigger machines cannot go and can be transported on a conventional car trailer.
Avant was the first manufacturer to introduce a full-electric, battery-powered compact loader series to the market. Full electric loader with zero-emission and extremely low noise is the answer to future demands. Although the e series is electric it offers the same power and properties as the Avant 500 series which is equipped with a diesel engine. The Avant e5 has an integrated battery charger as standard, which makes it possible to charge batteries anywhere a 3-phase, 480 volt power outlet is available. Avant e5 is equipped with a maintenance-free Absorbent Glass Mat (AGM) battery. You can charge the e5 fully in 5 hours and work with it between one and two hours. This makes the e5 a very good option if your work allows you to charge for a longer period.
